You can similarly cover up white lacquered kitchen cupboards if you do the proper prep work. “Clean,” “scrape,” and “dry” are the memorable words when you paint over veneer. A spotless surface is bare since paint won’t stick to soil, residue, or oil. Scraping the lacquer cabinet paint finish will prompt a more grounded bond. Seal the cupboards with a stain-hindering, oil-based preliminary and come back to a top-quality oil-based veneer paint for best outcomes.
- Cover Your Floors
Cover the floor around the cupboards utilizing drop cloths or rosin papersecure paper to the floor using lacquer cabinet paint.
- Set up Your Workspace
Set up your workspace for the entryways and drawers.
- Eliminate All Cabinet Doors and Drawers
Eliminate the entryways and the drawers from the cupboards. Utilize a drill to eliminate the screws from the pivots. Number the ways to their comparing puts on the bureau outline for legitimate substitution later, as every entryway is sliced to fit. Convey the entryways and drawers to the workspace. Eliminate the handles and pivots utilizing the drill or a screwdriver. Secure the pivots to the rear of the entrance with painter’s tape as you eliminate them to guarantee a careful fit when you supplant them.
- Play it safe
Put on eye assurance and a couple of plastic gloves. Lowe suggests utilizing trisodium phosphate, or TSP. Set up a pail of heated water and TSP. Blend the TSP arrangement as per the producer’s directions and set up an extra container of clean water for washing.
- Clean the Cabinets
Clean the cupboards, entryways, and drawers utilizing a perfect fabric absorbed by the TSP arrangement. Flush the cabinets with clean water and permit them to dry.
- Utilize a Medium-Grit Sanding Pad
Sand the cupboards with a medium-coarseness sanding cushion to scrape and dull the enamel finish. Eliminate the sanding dust with a vacuum.
- Change to a Fine-Grit Sanding Pad
Sand the cupboards a subsequent time, utilizing a fine-coarseness sanding cushion to guarantee a smooth substrate for paint. Eliminate the sanding dust with a vacuum.
- Apply Vinyl Spackling to Any Holes
Fill all openings and scratches in the cupboards with vinyl spackling, utilizing a clay blade, exhorts Family Handyman. Permit the spackling to dry and sand the fixed regions using a fine-coarseness sanding cushion. Wipe the sanding dust with a spotless, moist material.
